Quote:
Originally Posted by Joeshin87
You can just unplug the plug for the valve controller to keep it open 100% for free. Just reach under the car on the right side, unplug it and tuck it away. What I ended up doing was I placed electrical tape over the plug and lightly tucked it back into the female connector just enough for it to hold in place. I then got some shrink tubing and heated it up around the plug to ensure it stays in there until I remove the shrink tube.
|
Yea this is another solution but you lose the ability of now closing the valves, especially when adding downpipes, midipes, etc