Quote:
|
Originally Posted by oonowindoo
Quote:
Originally Posted by jwzimm
I only saw the single adjustment screw and it appeared to move the entire beam pattern up. It makes sense really. You wouldn't want to aim them independently anyway since they work in tandem.
Give it a try. The worst you can do is not like it. So long as you record how far you adjusted them you can always put them back.
|
ok i will give it a try. it can't be worse than what i have right now as long as i dont go crazy with the turning. |
There are two screws so use the correct one for your vehicle, and follow the alignment instructions exactly.
1 full turn is one degree, so start with quarter or half turns. A little goes a long way. The manual adjustments will sometimes make an audible click when moving the stepper motor, sometimes they won't make any noise but are moving the motor, and sometimes there's noise and no movement, or no movement and no noise. Have to pay attention and take it slow.