Quote:
Originally Posted by omasou
Quote:
Originally Posted by eforty6_m3
Are you referring to the footing around the perimeter of the garage? Or the lip of the entrance of the garage where it meets the asphalt driveway?
Either way, I should have left more room (1/2" or so would have been enough) between the tiles and the back wall of the garage. Instead, I went right up against the footing. With the heat from the unusually warm summer we've had, some of the rubber tiles (I went with rubber in front of my workbench for comfort reasons) are bunching up because of expansion.
I'm going to trim back some of the tiles in the fall to allow that 1/2" or so of room that Swisstrax recommended (and I ignored) for expansion/contraction.
|
I was referring to the entrance. Thanks. |
Ah, nope, I have the Swisstrax edge pieces right up against the lip. You can see it in these photos.