03-15-2024, 08:01 PM | #1 |
Captain
1135
Rep 843
Posts |
Ggen CS Wheels
Hello quick question has anyone successfully fitted the set of the new CS wheels to their Z4? I am ordering a 2025 loaded with manual and most likely will be modifying the entire car.
|
03-15-2024, 09:27 PM | #2 |
Private
129
Rep 50
Posts |
The offsets are too low, with front and rear at 20mm. Unless you're going for the specific look of wheels poking out way past the fenders, sadly they won't work.
I absolutely love the 827Ms. |
Appreciate
0
|
03-22-2024, 07:00 AM | #3 |
Lieutenant
1087
Rep 418
Posts
Drives: BMW Z4 G29 M40i
Join Date: Feb 2022
Location: Antwerp
|
isn't 20mm still inside the fenders?
I added 10 and I feel like there's still a lot of room to the edge of the fender on the top. But maybe it's a little deceptive because my car sits on the stock suspension
__________________
2019 BMW Z4 G29 M40i @600hp - Insta: ZZZZ_M40i
|
Appreciate
0
|
04-01-2024, 10:59 AM | #4 | |
Private
129
Rep 50
Posts |
Quote:
You also need to add another 12.7mm for the wider, double staggered CS/CSL wheels @ 19x9.5 and 20x10.5. Credit to T&PBMW: https://g29.bimmerpost.com/forums/sh....php?t=1838930 He's running the following set up. 255/35/19 et25, 9.5” wheel in the front 285/30/20 et30, 10.5” wheel in the rear Picture moving his rear wheels out another 10mm and the fronts by 5mm. I suspect that aggressive a level of fitment is not going to appeal to the majority of Z4 owners, but there's always an ass for every seat.. |
|
04-02-2024, 01:18 AM | #5 | |
Lieutenant
1087
Rep 418
Posts
Drives: BMW Z4 G29 M40i
Join Date: Feb 2022
Location: Antwerp
|
Quote:
I wish i went a bit more agressive with my wheels, I prefer the look of the alignment being to the top of the wheelwell instead of to the bottom.
__________________
2019 BMW Z4 G29 M40i @600hp - Insta: ZZZZ_M40i
|
|
Appreciate
1
vertigo corsa129.00 |
Post Reply |
Bookmarks |
|
|