Stock front end camber

z4forme · 12-19-2023, 11:21 PM

My front wheels (2024 Z4 M40i) have at least a degree of negative camber. When looking closely down the side of the car it is obvious by comparison to the rears.

Does anyone know the stock alignment settings?

jerroddean · 12-20-2023, 02:26 AM

Quote:

Originally Posted by z4forme

My front wheels (2024 Z4 M40i) have at least a degree of negative camber. When looking closely down the side of the car it is obvious by geometry dash subzero comparison to the rears.

Does anyone know the stock alignment settings?

I haven't personally got an alignment done on my Z4 (will do soon once I've done the front + rear suspension refresh), but I have heard of people being very happy with the Z4 M alignment settings when going to a good, reputable garage who know about the different Z4 setups.

RavenGX · 12-20-2023, 02:42 AM

i had my alignment done this year i think, i'll see if i can find the paper with the numbers again.

RavenGX · 12-20-2023, 02:51 AM

I couldn't find the papers anymore, but i found a picture i took from it, but its a bit blurry.

the middle column are the target numbers

rear camber -2'00"

front camber -1'45"

CJ421 · 12-20-2023, 06:32 AM

I got my Z4 aligned at a BMW specialty shop and posted the results here. That was right after I took delivery, and as usual, the alignment was F'd from the factory. So I always get my BMWs aligned after taking delivery.

The front and rear should be ~-2 degrees camber.

Charles

ebirotedu · 12-20-2023, 08:48 AM

My alignment was significantly off from the factory as well. First time that’s ever happened to when taking delivery of a new car. Will insist on having my next BMW checked before I take delivery next time.

Quote:

Originally Posted by CJ421

I got my Z4 aligned at a BMW specialty shop and posted the results here. That was right after I took delivery, and as usual, the alignment was F'd from the factory. So I always get my BMWs aligned after taking delivery.

The front and rear should be ~-2 degrees camber.

Charles

12-19-2023, 11:21 PM	#1
z4forme Enlisted Member 114 Rep 47 Posts Drives: 2024 Z4 M4.0i Join Date: Oct 2023 Location: Monterey, CA iTrader: (0)	Stock front end camber My front wheels (2024 Z4 M40i) have at least a degree of negative camber. When looking closely down the side of the car it is obvious by comparison to the rears. Does anyone know the stock alignment settings?
	Appreciate 0 Tweet Quote

12-20-2023, 02:42 AM	#3
RavenGX Lieutenant 1078 Rep 412 Posts Drives: BMW Z4 G29 M40i Join Date: Feb 2022 Location: Antwerp iTrader: (0) Garage List 2019 BMW Z4 M40i [9.52]	i had my alignment done this year i think, i'll see if i can find the paper with the numbers again. __________________ 2019 BMW Z4 G29 M40i @600hp - Insta: ZZZZ_M40i
	Appreciate 0 Quote

12-20-2023, 02:51 AM	#4
RavenGX Lieutenant 1078 Rep 412 Posts Drives: BMW Z4 G29 M40i Join Date: Feb 2022 Location: Antwerp iTrader: (0) Garage List 2019 BMW Z4 M40i [9.52]	I couldn't find the papers anymore, but i found a picture i took from it, but its a bit blurry. the middle column are the target numbers rear camber -2'00" front camber -1'45" Attached Images __________________ 2019 BMW Z4 G29 M40i @600hp - Insta: ZZZZ_M40i
	Appreciate 3 Argo697.00 tracer bullet2411.50 z4forme114.00 Quote

12-20-2023, 06:32 AM	#5
CJ421 Brigadier General 1559 Rep 4,109 Posts Drives: BMW M3 Join Date: Feb 2011 Location: Blue Bell, PA iTrader: (1) Garage List 2024 BMW M3 Sedan [9.50]	I got my Z4 aligned at a BMW specialty shop and posted the results here. That was right after I took delivery, and as usual, the alignment was F'd from the factory. So I always get my BMWs aligned after taking delivery. The front and rear should be ~-2 degrees camber. Charles __________________ 2024 BMW M3 Sedan Frozen Pure Grey II/Fjord Blue, 6MT Past: 2021 Z4 M40i Frozen Grey II/Black Alcantara \| 2017 F30 340i Mineral Gray/Coral Red, 6MT \| 2011 E92 335i Le Mans Blue/Black, 6MT
	Appreciate 3 tracer bullet2411.50 ebirotedu1460.00 z4forme114.00 Quote