[FrozenGT]

Hello quick question has anyone successfully fitted the set of the new CS wheels to their Z4? I am ordering a 2025 loaded with manual and most likely will be modifying the entire car.

[vertigo corsa]

The offsets are too low, with front and rear at 20mm. Unless you're going for the specific look of wheels poking out way past the fenders, sadly they won't work.

I absolutely love the 827Ms.

[RavenGX]

isn't 20mm still inside the fenders?
I added 10 and I feel like there's still a lot of room to the edge of the fender on the top.
But maybe it's a little deceptive because my car sits on the stock suspension

[vertigo corsa]

Originally Posted by RavenGX

isn't 20mm still inside the fenders?
I added 10 and I feel like there's still a lot of room to the edge of the fender on the top.

Agreed, if you only factor in the different offsets.

You also need to add another 12.7mm for the wider, double staggered CS/CSL wheels @ 19x9.5 and 20x10.5.

Credit to T&PBMW:

https://g29.bimmerpost.com/forums/sh....php?t=1838930

He's running the following set up.

255/35/19 et25, 9.5” wheel in the front
285/30/20 et30, 10.5” wheel in the rear

Picture moving his rear wheels out another 10mm and the fronts by 5mm. I suspect that aggressive a level of fitment is not going to appeal to the majority of Z4 owners, but there's always an ass for every seat..

[RavenGX]

Originally Posted by vertigo corsa

Agreed, if you only factor in the different offsets.

You also need to add another 12.7mm for the wider, double staggered CS/CSL wheels @ 19x9.5 and 20x10.5.

Credit to T&PBMW:

https://g29.bimmerpost.com/forums/sh....php?t=1838930

He's running the following set up.

255/35/19 et25, 9.5” wheel in the front
285/30/20 et30, 10.5” wheel in the rear

Picture moving his rear wheels out another 10mm and the fronts by 5mm. I suspect that aggressive a level of fitment is not going to appeal to the majority of Z4 owners, but there's always an ass for every seat..

My ass thinks it looks good!
I wish i went a bit more agressive with my wheels, I prefer the look of the alignment being to the top of the wheelwell instead of to the bottom.