[jlapicki]

Originally Posted by F87LUV

Did you need to fabricate anything to connect or direct fitment?

Just unscrew the stock tips and bolt on the new ones....they are made perfectly to fit the oval exhaust pipes coming out of the stock mufflers....they come in multiple colors and finishes.....just Google them..be sure to specify model and year...

https://monacoms.com/bmw-m-performan...waAp_GEALw_wcB

[boss2k]

Originally Posted by jlapicki

Just unscrew the stock tips and bolt on the new ones....they are made perfectly to fit the oval exhaust pipes coming out of the stock mufflers....they come in multiple colors and finishes.....just Google them..be sure to specify model and year...

https://monacoms.com/bmw-m-performan...waAp_GEALw_wcB

Will these fit the G29 M40I manual car?

https://monacoms.com/bmw-m-performan...-exhaust-tips/

[flak]

Originally Posted by jlapicki

Just unscrew the stock tips and bolt on the new ones....they are made perfectly to fit the oval exhaust pipes coming out of the stock mufflers....they come in multiple colors and finishes.....just Google them..be sure to specify model and year...

https://monacoms.com/bmw-m-performan...waAp_GEALw_wcB

Thanks those look really nice maybe a mod I'll do at some point

[vertigo corsa]

Originally Posted by jlapicki

Just unscrew the stock tips and bolt on the new ones....they are made perfectly to fit the oval exhaust pipes coming out of the stock mufflers....

Different muffler on the M440i, the OEM Z4 tips are welded on.

[boss2k]

Originally Posted by vertigo corsa

Different muffler on the M440i, the OEM Z4 tips are welded on.

Great point and pic so the monaco tips dont fit right?

[vertigo corsa]

I found a clearer pic of the G29 back box. I think the easiest solution to get any of those aftermarket quad tips to work would be to cut off the stock outlet pipes at the muffler - then weld new ones on which allow use of the tips. Valve also eeds to be welded into the new set up.

Bottom pic is a 5 series exhaust in which the owner did the same thing as described.

[RavenGX]

Originally Posted by vertigo corsa

I found a clearer pic of the G29 back box. I think the easiest solution to get any of those aftermarket quad tips to work would be to cut off the stock outlet pipes at the muffler - then weld new ones on which allow use of the tips. Valve also eeds to be welded into the new set up.

Bottom pic is a 5 series exhaust in which the owner did the same thing as described.

i think there is a lot less room, and the tips will sick out a lot from the bumper. I've seen one like that on facebook once, but i can not find it again, otherwise i would have posted it here

[vertigo corsa]

Originally Posted by RavenGX

..i think there is a lot less room, and the tips will sick out a lot from the bumper.

Exactly. Regardless, some shop fabrication is going to be required for a flusher fit.

Something like this design might be a good place to begin:

https://www.quality-tuning.eu/ca/uni...n60-90-degrees

[Thucp]

Originally Posted by nautiboy

Here's mine. The original tips are fine except a little bland-looking, having had the CF bodykit fitted....that forced me to upgrade to Quaqs

Where did you get the tips from?

[IcewaterPete]

Originally Posted by nautiboy

Here's mine. The original tips are fine except a little bland-looking, having had the CF bodykit fitted....that forced me to upgrade to Quaqs

Perfect!

[alvitdk]

Originally Posted by vertigo corsa

This showed up in my YouTube feed yesterday. New item, appears very similar to their Supra version, but with the quad tailpipe set up.

https://afepower.com/afe-power-49-36...st-w-black-tip

Really interested in it but can't find anything about how it connects to the downpipe, given this has only one port and not two as the OEM setup. I also had an AFE on my Porsche 981S for a year before the welds broke open, so not sure about the quality on this one. Anyone installed it?